Quick Wash Button; Rinse Hold Button; Delay Start Button; Extra Rinse Button - Electrolux EWS 1021 Instruction Booklet

7 Quick wash button

This option can be used for lightly soiled items (not for
wool, handwash, E 60°- E 40°- AA 40° - 60° and
40° ) in order to obtain a good washing program in a
short time.
The washing time will be reduced according to the
type of fabric and the selected temperature.

8 Rinse hold button

When you choose this option, the machine will not
drain the water of the last rinse, so as not to wrinkle
the laundry. At the end of the programme, the light of
the START/PAUSE button goes out, the pilot lights
and remain lit, the door is blocked , to
indicate that the water must be drained. To empty
out water there are 2 possibilities:
• Select programme B (drain): The water is
emptied out without spinning.
• Select programme C (spin) or D (delicate spin).
Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button. The water is emptied out and the
laundry is spun at the selected spin speed.
Attention!
Before choosing the programme B , C or D
the selector dial has to be positioned on «O».

9 Extra rinse button

This option can be selected with all programmes,
except the wool programme and handwash. The
machine will add 2 rinses to the selected program.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
10 Night cycle button
When you choose this option, the machine will not
drain the water of the last rinse, so as not to wrinkle
the laundry.
As all spinning phases are suppressed, this washing
cycle is very noiseless and it can be selectionned at
night or in times with a more economical power rate.
On cotton and synthetic programmes the rinses will
be performed with more water.
To complete the cycle, choose one of the following
programmes:
B = Drain
To drain the water select B (Drain) programme by
means of the selector dial, then press the
START/PAUSE button.
C = Spin
To spin the laundry choose C (spin) or D (delicate
spin) programme by means of the selector dial;
select spin speed by means of button
press the START/PAUSE button.
Important!
Before choosing the programme B (Drain), C (Spin)
or D (Delicate Spin) the selector dial has to be
positioned on O (Reset).

11 DELAY START button

The wash programme can be delayed from 30 min –
60 min – 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button: the machine starts
its hourly countdown.
The programme will start after the selected delay
has expired.
Cancelling the delayed start
• Depress START/PAUSE button.
• Depress DELAY START button
«0 0 '» is displayed.
• Depress START/PAUSE button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to Pause by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Display
The display shows the following information:
Cancelling – Duration of the programme –
Delayed start – Incorrect option selection –
Alarm code – End of programme.
9
and then
until the symbol