Electrolux EWS 1021 Instruction Booklet page 10

Cancelling
If a programme has been cancelled – programme
selector dial on position O – all the lights are off and
three flashing dashes will be displayed.
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining
is updated every minute.
Delayed start
The selected delay (23 hours max) set by means
of the relevant button appears on the display for
3 seconds, then the duration of the previously
selected programme is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
for 2 seconds.
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph "Something not working").
End of programme
When the programme has finished a flashing zero is
displayed.
10
Alarm codes