GE ZS48N Use And Care Manual page 13

48” built-in refrigerator
Table of Contents

Advertisement

The water and ice dispenser spill shelf should be
wiped dry immediately to prevent spotting. Water left
on the shelf may leave deposits that you can remove
by soaking in undiluted vinegar. You can also use a
paste of non-precipitating water softener (such as
acid powder per pint of hot tap water. Soak until the
deposit disappears or becomes loose enough to rinse
away. Usually 30 minutes soaking time is adequate.
Avoid using wax on the spill shelf and trim.
Cleaning—Inside
Inside the fresh food and freezer compartments
should be cleaned at least once a year. Unplug the
refrigerator before cleaning. If this is not practical,
wring excess moisture out of sponge or cloth when
cleaning around switches, lights or controls.
Use warm water and baking soda solution—about
a tablespoon of baking soda to a quart of water. This
both cleans and neutralizes odors. Rinse thoroughly
with water and wipe dry.
Other parts of the refrigerator—including door
gaskets, meat and vegetable drawers, ice storage
bin and all plastic parts-can be cleaned the same
way. After cleaning door gaskets, apply a thin layer of
petroleum jelly to the door gaskets at the hinge side.
This helps keep the gaskets from sticking and bending
out of shape. Do not use cleansing powders or other
abrasive cleaners.
The door handles and trim can be cleaned with a
cloth dampened with a solution of mild liquid
cloth. Don't use wax on the door handles or trim.
To help prevent odors, leave an open box of
baking soda in the rear of the refrigerator, on the
top shelf. Change the box every three months. An
open box of baking soda in the freezer will absorb
stale freezer odors.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents