Setting Up Your System - THOMSON 905 User Manual

Setting up Your System

These are the steps to set up your system. They are described step by step in detail on the following pages; so,
when you are ready, turn the page to get started. . .
Step 1: Install the Wi-Fi Card
Step 2: Install the Gateway Battery
(provides power should the electricity go out)
Step 3: Install the Handset Batteries
Step 4: Two Choices:
Charge the Handset with DC Adapter
Charge the Handset Docked to the Gateway
Step 5: Connect Cables
Connections Overview
Connect One or Two Computers with Ethernet Cables
Connect More than Two Computers with Ethernet Cables
Connect Telephone or Fax with Standard Analog Phone Line
Step 6: Activate the Advanced Cable Gateway
Step 7: Set-up Wireless Access for Your
Laptop, Wireless PC or Other Device
Step 8: Become Familiar with the Handset Operation
Access and Change Gateway Advanced Settings
Customize Your Handset
Add Additional Handsets (up to 5)
Order Additional Handsets (up to 5 supported) and Approved Rechargeable Handset Batteries -
Visit: www.thomson-store.com
3660181C
Basic Set-up
OR
Additional Options
Set-up
6
7
8
9
10
11
12
13
13
14
15
16-18
19-31
32-35
35
5