Edimax PS-1210MFn Manual page 78

Function is for user to disable, enable or let the MFP Server auto
select to connect to the wired or wireless network. If "Disable" is
selected, the MFP Server can only connect to the network through
wired Ethernet. If "Enable" is selected, the MFP Server can only
connect to the network through Wireless LAN. If "Auto" is selected,
the MFP Server can automatically decide to enable or disable the
wireless function. The MFP Server only can work in either Ethernet
or wireless LAN mode. It cannot work in both Ethernet and
wireless LAN mode at the same time. When the MFP Server starts
up, it will auto-detect if the LAN port is connected to an active
network by an Ethernet cable. If the MFP Server is connected to
an active network by Ethernet cable when starting up, the MFP
Server will run in Ethernet mode. If the MFP Server is not
connected to an active network by Ethernet cable when starting up,
the MFP Server will run in wireless LAN mode. The MFP Server
default is in "Auto" mode.
Mode is the operation mode of wireless station. You can choose
either "Ad Hoc" or "Infrastructure" mode. If you do not have any
access point and want to use peer-to-peer connection, you have to
choose "Ad Hoc" mode. If you have an access point as the
wireless LAN infrastructure, you have to choose "Infrastructure"
mode.
ESSID is the unique name identified by in a wireless LAN. The ID
prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations and access points
in the same WLAN network are the same.
Channel Number is the channel number of your wireless LAN.
Please make sure that the channel number of all stations and
access points in the same WLAN network are the same.
73