Edimax PS-1210MFn Manual page 37

Refresh
Connect
Disconnect
Add to My
Favorite
Auto Release
when idle time is
over xx minutes
(5-255)
indicates that the MFP is not being used. When
the status is "Busy", it indicates that other user is
using the MFP to scan, print, or etc.
Computer Name – It display the computer name
of the user who is connecting to the MFP.
Contact Information – When the current user
has set his "Contact Information", you can see it
here. You can contact with the current user for
asking to disconnect the MFP.
Refresh the "MFP Server List" immediately.
Let the MFP be connected to your computer.
Disconnect the selected MFP.
Add the MFP Servers that you frequently use to
"My Favorite List".
To avoid you occupy the MFP overtime; you can
setup auto release function. It is used to
automatically disconnect the current connection
after the MFP is idle for a specified period of
time. By default, it is never released. It is
recommended to enable the setting after the
MFP and MFP Server are installed completely so
that the MFP resource will not be occupied
permanently.
32