Network Port Setup - Edimax PS-1210MFn Manual

12.3 Network Port Setup

"Network Port Setup" Utility offers a very simple method to add or
remove MFP Server's printer port from the client's computer.
During the MFP Server's installation procedure, the system will
automatically search for all MFP Servers on the network, and add
the printer port of the MFP Server you have selected to user's
computer (see below).
If you have just installed another new MFP Server in the network,
you must run this program first. This program will search for new
MFP Servers and allow you to add the new network printer port
into your computer conveniently. Perform the standard Add Printer
procedure, then you can print directly to the printer through the
newly installed MFP Server.
Note:
Please be aware that Network Port Setup Utility can only detect
and configure all MFP Servers within the same network; it cannot
search and configure the MFP Servers on other subnets across
network segments.
113