Table of Contents
Advertisement
Maintenance
The Recorder is maintenance-free. Keep it clean to allow for easy visual inspections. To
clean the Recorder, unplug it from the outlet and wipe it with a dry, clean cloth.
To avoid damaging the Recorder, do not use aromatic
hydrocarbons or chlorinated solvents for cleaning. These
solutions will react with and damage the plastics used in the
Recorder.
A non-replaceable, rechargeable Lithium Battery powers the Recorder
clock.
Do not mix with the solid waste stream. A qualified recycler or hazardous
materials handler should dispose of spent batteries.
Contact your authorized Fluke Service Center for recycling information.
Service
The Recorder contains no user-serviceable parts. Opening the case, or attempting to do
so, will void the warranty and safety certification. The USB Cable is the only
replacement part in the VR1710 package. If service or calibration is required, please
contact a local dealer or an authorized Fluke service center (see Contacting Fluke).
Software Updates
Fluke may periodically offer software and internal firmware updates for the Recorder. To
download the latest Power Log software or firmware, please visit the Support page at
www.fluke.com.
Specifications
Electrical Specifications
RMS voltage channels
RMS voltage measurement range
RMS voltage resolution
RMS voltage uncertainty
Measuring method
Sampling frequency
Frequency range
Frequency uncertainty
Transient recording resolution
Harmonic amplitude uncertainty
Maximum harmonics recording order
WCaution
/
Note
2
70 V to 300 V
0.125 V
±0.5 % of range (300 V)
True RMS
32 kHz
50 ±1 Hz, 60 ±1 Hz
±0.02 Hz
12 bit
±0.1 % relative to fundamental RMS value
50th
Voltage Quality Recorder
Maintenance
9
Hide quick links:
Advertisement
Table of Contents
