1744/1743
Users Manual
Figure 12. Selecting Voltage Input Ranges During Job Processing
For P-P logging, the P-P voltage must be entered as the nominal
voltage (e.g. 400 V for 230 V systems).
Signal Sampling
Input signals (up to three voltages and four currents) are filtered with an anti-
aliasing filter, and digitized with a 16-bit A/D converter. The sampling rate is
10.24 kHz. All parameters are calculated from this data.
Resolution Accuracy
Resolution and accuracy depend on the logging parameter. For details, see
Shop for Fluke products online at:
28
Note
MyFlukeStore
www.
egb015.bmp
1.877.766.5412
.com