Clock Functions - Zanussi ZOP37902XK User Manual

When you deactivate the appliance, the display
shows the residual heat indicator
perature in the oven is more than 40 °C. Turn

Clock functions

Symbol Function
Minute Minder
Time of day
Duration
End
Press again and again to change the
clock function.
Press to confirm the settings of the
clock functions, or wait 5 seconds for the
setting to be confirmed automatically.
Setting the Duration or End function
1. Press
again and again until the symbol
or flashes in the display.
2. Press + or - to set the minutes.
3. Press
to confirm.
4. Press + or - to set the hour.
5. Press
to confirm.
6. When the set time ends, the symbol
and the set time flash. The acoustic
signal sounds for two minutes. The appli-
ance deactivates. Press a button or open
the appliance door to stop the signal.
If you press
Duration , the appliance switches to
setting the End function.
Setting the Minute Minder
Used to set a countdown time. The maximum
time you can set is 23 hours 59 minutes. This
function has no effect on the operation of the
oven. You can set the Minute Minder at any
time, also if the appliance is off.
8
if the tem-
To set a countdown time.
To set, change or check the time of day. Refer to "Setting the time of day".
To set how long the appliance must operate. First set an oven function be-
fore you set this function.
To set when the appliance must be deactivated. First set an oven function
before you set this function. You can use Duration and End at the same
time (Time Delay) to set the time when the appliance must be activated and
then deactivated.
while setting the time for
the temperature knob left or right to show the
oven temperature on the display.
Description
1. Press
flash in the display.
2. Press + or - to set the Minute Minder. At
first the time is calculated in minutes and
seconds. When the time you set is longer
than 60 minutes, the symbol
in the display. The appliance then calcu-
lates the time in hours and minutes.
3. The Minute Minder starts automatically af-
ter five seconds.
4. When the set time ends, the acoustic sig-
nal sounds for two minutes. 00:00 and
flash in the display. Press a button to stop
the signal.
If you set the Minute Minder when the Du-
or
ration
the symbol
Count Up Timer
Use the Count Up Timer to monitor how long
the oven operates. It is on immediately when
the oven starts to heat.
To reset the Count Up Timer, press and hold +
and -. The timer starts to count up again.
You cannot use the Count Up Timer when
the Duration
ates.
again and again until
or End function operates,
comes on in the display.
or End function oper-
www.zanussi.com
and 00
comes on