Clock Functions; Using The Accessories - Zanussi ZOP38903XD User Manual

Clock functions

Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
the same time to set the time when the ap-
pliance must be activated and then deactivated.
First set Duration
Setting the clock functions
1. For Duration
function and temperature. This is not nec-
essary for the Minute Minder
"Setting an oven function".
2. Press
again and again until the symbol
for the necessary clock function flashes.

Using the accessories

Warning! Refer to the Safety chapters.
Trivet and Grill- / Roasting pan
Warning! Be careful when you remove
the accessories from a hot appliance.
There is a risk of burns.
www.zanussi.com
To set, change or check the time of day.
To set a countdown time. This function has no effect on the operation of
the oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End
, then End .
2
and End , set an oven
. Refer to
Application
3. Press + or - to set the necessary clock
at
function.
The display shows the symbol for the clock
function you set. When the set time ends,
the symbol flashes and an acoustic signal
sounds for two minutes.
With the Duration
tions, the appliance deactivates automati-
cally.
4. Press a button to stop the signal.
1
5. Deactivate the appliance.
Cancelling the clock functions
1. Press
for the necessary clock function and
flash in the display.
2. Press and hold the button - until the clock
function goes out.
and End
again and again until the symbol
func-
9