Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi Electrolux ZCM1031X
Summary of Contents for Zanussi Electrolux ZCM1031X
- Page 1 ELECTRIC DOUBLE OVEN AND GRILL WITH GAS HOB ZCM 1030 X ZCM 1031 X...
- Page 2 For your safety Do not Warning: You must read these warnings carefully before installing or using the appliance. If you need assistance, contact our Customer Services Department on 08705 727727. Do's and Do Not's Installation Do not Do not Do not Do not Do not DO NOT LEAVE UNATTENDED WHILE COOKING.
-
Page 3: General Information
GENERAL INFORMATION TECHNICAL AFTER SALES SERVICE ENVIRONMENT PROTECTION Packing disposal WARNING: RECOMANDATIONS AND PRECAUTIONS ATTENTION: DEAR CUSTOMER, to switch off the electricity supply to the appliance. IN CASE OF FIRE: the main valve of the gas supply and switch off the electricity supply to the appliance WARRANTY FOR YOU AND YOUR CHILDRENS SAFETY For full Terms and Conditions of Guarantee please see the... -
Page 4: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Control panel... -
Page 5: Energy Saving Tips
HOB USE USE OF THE ELECTRIC OVEN Before the first use of the oven USING GAS BURNERS (It is necessary to heat up the oven at the maximum temperature for about 30-40 minutes in order to burn off these residues). Note: MANUAL IGNITION (during mains power failure) AUTOMATIC ELECTRIC IGNITION (optional) - Page 6 Recommended cooking tables I II...
-
Page 7: Convection Oven
WARNING Use of the oven The appliance must be used with the oven door closed. CONVECTION OVEN The oven is fitted with: ATTENTION: Oven lamp 60 ÷ max Defrosting with fan Note: Natural convection MULTIFUNCTIONAL OVEN The oven is fitted with: Fan oven N.B.: Oven thermostat knob... - Page 8 Automatic use with cooking time and end time setting INSTRUCTIONS FOR USE OF CLOCK AND TIMER (ACCORDING TO THE MODELS) “LED” PROGRAMMER (Fig. 5) Features Functions Minute minder Display signal Start programme and check Setting error Setting Cancelling a setting + and - buttons.
-
Page 9: Overall Dimensions
INSTRUCTIONS FOR THE USER CARE AND MAINTENANCE OVERALL DIMENSIONS Before cleaning the appliance, switch off the electrical supply at the control switch. Do not clean the appliance surfaces when still hot. ENAMELLED SURFACES WARNINGS PANSTANDS AND BURNERS INSTALLATION IMPORTANT: Make sure that gas jets are not blocked. Location OVEN DOOR Attention, do not attempt to move the jumpers while the door... -
Page 10: Gas Connection
Gas Safety (Installation & Use) Regulations screw Installation & Use Regulations Gas Connection (all installation and service work must be carried by a CORGI registered engineer) GAS CONNECTION IMPORTANT Natural Gas Only UK, CORGI Provision for Ventilation ELECTRICAL CONNECTION This appliance must be installed by a qualified person in accordance with the latest edition of the IEE Regulations and in compliance with the manufacturer instructions. -
Page 11: Gas Adjustment
TAB. D GENERAL INJECTORS TABLE MINIMUM FLOW ADJUSTMENT FOR CONTROL KNOBS IMPORTANT Attention: REPLACEMENT OF THE CABLE GAS ADJUSTMENT Conversion to LPG (all work must be carried out by CORGI registered engineers) APPLIANCE MAINTENANCE REPLACEMENT OF HOB-TOP INJECTORS WARNINGS Oven lamp (the oven lamp is not covered by the guarantee) The oven lamp...