Minimum Dimensions - Jenn-Air JBS7524BS Instructions Manual

Minimum Installation Clearances
For proper installation, the following minimum clearances must exist above and below the cutout opening.
Above Cabinet/Storage Drawer Installation
G
A. 23 " (60.0 cm) minimum cabinet width
B. 21 " (55.6 cm) minimum cutout width
C. 17 " (45.0 cm) recommended cutout height*
D. " (1.2 cm) minimum from top of cutout to bottom of upper
cabinet door or counter
*Will fit cutout height from 17 " (45.0 cm) to 17 " (45.4 cm).
Minimum Cutout Dimensions
NOTE: Depth dimension may be 21 " (55.2 cm) with non-flush
receptacle only if the receptacle is located in upper right or upper
left corner. See "Cutout Top View."
" (55.2 cm)*
26 " (66.7 cm)**
21 " (55.6 cm)
17 " 25 " (65.4 cm)
(45.0 cm)
28 " (73.0 cm)

Minimum Dimensions

A
B
C*
i d t h i d t h W W
Below Counter Installation
(without cooktop installed above)
D
G
E
C*
F
E. " (1.2 cm) minimum from bottom of cutout to top of lower
cabinet door or drawer
F. 23 "-51 " (60.0-130.0 cm) bottom of cutout to floor
G. Recommended junction box location
*With flush receptacle, or with non-flush receptacle located in
upper right or upper left corner of cutout.
**With non-flush receptacle.
DIM. 24" (59.5 CM)
INSTALLATION
Width 21 " (55.6 cm)
± " (4.8 mm)
Height 17 " (45.0 cm) for all installations
Depth 21 " (55.0 cm) with flush receptacle, or with non-flush
receptacle located in far corner;
26 " (66.7 cm) with non-flush receptacle
D
A
G
B
E
F
27" (68.2 CM) 30" (75.6 CM)
INSTALLATION INSTALLATION
25 " (65.4 cm) Min. 25 "
± " (4.8 mm) (65.4 cm)
Max. 28 "
(73.0 cm)
3