Table of Contents
Advertisement
14 electrolux use
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before pressing button
8
.
Select the temperature by pressing
2
button
Press this button repeatedly to increase
or decrease the temperature, if you
want your laundry to be washed at a
temperature different from the one
proposed by the washer-dryer.
When selecting a programme, the pilot
light corresponding to the temperature
proposed, illuminates.
corresponds to cold wash.
Select the Spin Speed or Rinse
Hold option by pressing button
Press this button repeatedly to change
the spin speed, if you want your laundry
to be spun at a speed different from the
one proposed by the washer-dryer. The
relevant light will light up.
When selecting a programme, the pilot
light corresponding to the maximum
speed allowed for that programme,
illuminates.
Rinse Hold
: by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished, the button
3
8
light goes off, the
display shows 3 flashing zeros «
and the door is locked to indicate that
the water must be emptied out.
To empty out the water please see
the paragraph «At the end of the
programme».
Select the Autodry by pressing
4
button
By means of this button you can
choose the required degree of drying for
cottons and synthetics:
Extra dry (Cottons)
Store dry (Cottons and
Synthetics)
Iron dry (Cottons)
The relevant light illuminates.
The drying time is automatically
adjusted by the machine: the laundry
will be dried to the selected dryness
degree.
Select the Drying Time by pressing
5
button
If you wish to carry out a timed drying
programme, press this button until the
drying time you want appears on the
display according to the fabrics (cot-
tons or synthetics) you have to dry.
For Cottons and Synthetics you can
select a drying time from 10 minutes to
2.10
130 minutes (
Every time you press this button the
drying time increases by 5 mins.
Select the Delay Start by pressing
6
button
Before you start the programme, if you
wish to delay the start, press this button
repeatedly, to select the desired delay.
The relevant light will illuminate.
0.00
).
»
Advertisement
Table of Contents
