Table of Contents
Advertisement
Display ( )
7
7.1
Duration of selected
programme/
After selecting a programme, the
duration is displayed in hours and
minutes (for example
duration is calculated automatically on
the basis of the maximum
recommended load for each type of
fabric. After the programme has
started, the time remaining is updated
every minute.
/Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (max 130 mins =
2.10
).
After the programme has started the
time remaining is updated every
minute.
/D
elayed start
The selected delay set by pressing the
relevant button appears on the display
for a few seconds, then the duration of
the previously selected programme is
2.05
). The
displayed.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
/Alarm codes
In the event of operating problems,
some alarm codes can be displayed,
E20
for example
(see chapter «What to
do if...»).
/Incorrect option selection
If an option, which is not compatible
with the set washing programme, is
selected, the message Err is displayed
for a few seconds and the integrated
red light of button
/End of programme
When the programme has finished, the
programme phase icons desappear
and three blinking zeros «
displayed, the pilot light of button
go out and the door can be opened.
The door can be opened.
use electrolux 11
8
starts blinking.
0.00
» are
8
S
t
Advertisement
Table of Contents
