Table of Contents
Advertisement
Problem
The appliance does not heat up
The oven lamp does not oper-
ate
The display shows F102
The display shows an error
code that is not in this list
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
Warning! Refer to "Safety information"
chapter.
The handle can be replaced to match
the décor of your kitchen. The change
must be done by an authorized person.
Use only genuine replacement parts.
ELECTRICAL CONNECTION WITH THE
HOB
You can connect the oven with an inde-
pendent hob from the current range of
Electrolux and AEG hobs . You can buy the
necessary connection cable separately:
• AK - EB/GKTC (S) 1 m for ceramic hobs.
• AK - EB/GKTCi (S) 1 m for induction
hobs.
Possible cause
The fuse is released
The oven lamp is defective
The door lock is defect
There is an electronic error
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
The hob connection socket is at the top of
the oven cabinet.
Solution
Make sure, if the fuse is the
cause for the malfunction. If the
fuse releases again and again,
refer to an authorized electri-
cian
Replace the oven lamp.
• Close the door correctly
• Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and
activate it again
• If the display shows F102
again, refer to the Service
Center
• Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and
activate it again
• If the display shows the error
code again, refer to the Serv-
ice Center
.........................................
.........................................
.........................................
electrolux 17
Advertisement
Table of Contents
