Table of Contents
Advertisement
14 electrolux
Activate the Settings menu:
1. If necessary, deactivate the appliance
.
2. Touch and hold
The display shows "SET1" and "1"
flashes.
3. Touch
/
4. Touch
.
5. Touch
/
the setting.
Oven temperature
30 °C -120 °C
120 °C - 200 °C
200 °C -250 °C
250 °C -maximum °C
After an automatic switch-off, touch a sen-
sor field to operate the appliance again.
Important! The Automatic switch-off works
with all oven functions, apart from Light,
Low temperature cooking, core
temperature sensor, Duration, End, Time
delay.
BRIGHTNESS OF THE DISPLAY
There are two modes of display's
brightness:
• Night brightness - when the appliance is
off, the brightness of the display is lower
between 22:00 and 06:00;
• Day brightness:
– when the appliance is on;
CARE AND CLEANING
Warning! Refer to "Safety information"
chapter.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and cleaning
agent.
• To clean metal surfaces use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories (with a soft cloth
with warm water and cleaning agent) af-
ter each use and let them dry.
for three seconds.
to set the setting.
to change the value of
6. Touch
.
AUTOMATIC SWITCH-OFF
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven tempera-
ture.
Switch-off time
12.5 h.
8.5 h.
5.5 h.
3.0 h.
– if you touch any of the sensor fields
during night brightness (apart from ON/
OFF), the display goes back to day
brightness mode for next 10 seconds;
– if the appliance is off and you set the
minute minder. When the minute mind-
er function ends, the display goes back
to night brightness;
COOLING FAN
When the appliance operates, the cooling
fan activates automatically to keep the sur-
faces of the appliance cool. If you deacti-
vate the appliance, the cooling fan can con-
tinue to operate until the appliance cools
down.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can cause a damage to the nonstick
coating.
CATALYTIC CLEANING
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the appliance operates.
To support this self-cleaning process heat
the appliance without any food regularly:
1. Remove accessories from the appli-
ance.
Advertisement
Table of Contents
