Table of Contents
Advertisement
10 electrolux
4. When the set time ends, an acoustic
signal operates for two minutes.
symbol and time setting flash in the
display. The appliance deactivates.
5. Touch any sensor field or open the
oven door to stop an acoustic signal.
6. Deactivate the appliance.
SETTING THE MINUTE MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This function
has no effect on the operation of the oven.
You can set the MINUTE MINDER any time,
also if the appliance is off.
1. Touch
.
and "00" flash in the display.
2. Use
or
MINDER. First you set the seconds and
then minutes and hours.
3. Touch
and
reset the set time.
4. Touch
or the MINUTE MINDER
starts automatically after five seconds.
5. When set time ends, an acoustic signal
operates for two minutes. "00:00" and
flash in the display.
6. Touch a sensor field or open the appli-
ance door to stop the acoustic signal.
AUTOMATIC PROGRAMMES
Warning! Refer to "Safety information"
chapter.
There are 9 automatic programmes
and recipes. Use an automatic pro-
gramme or recipe when you do not
have a knowledge or experience how
to prepare a dish. You can find the rec-
ipes for the automatic programmes in
the "Recipe book".
There are three types of automatic
programmes:
• Automatic recipes;
• Automatic programmes with weight in-
put;
• Automatic programmes with core tem-
perature sensor (for selected models on-
ly);
AUTOMATIC RECIPES
Setting an automatic recipe:
1. Activate the appliance.
to set the MINUTE
at the same time to
SETTING THE TIME DELAY FUNCTION
DURATION
and END
the same time, if the oven is to be switched
on and off automatically later. In this case
first set DURATION
function (refer to "Setting the DURATION"
and "Setting the END ").
When the Time delay function is activated
the display shows static symbol of the oven
function,
with a dot and
shows which clock function is on in the
Clock/Residual heat display.
COUNT UP TIMER
Use the Count Up Timer to monitor how
long the appliance operates. It is on imme-
diately when the appliance starts to heat.
Reset the Count Up Timer: Touch
and at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use Count Up Timer when
Duration or End is set.
2. Touch
.
The display shows symbol and number
of the automatic programme.
3. Touch
or
matic recipes.
4. Touch
or the automatic recipe acti-
vates automatically after five seconds.
5. When set time ends, an acoustic signal
operates for two minutes. Symbol
flashes.
The appliance deactivates.
6. Touch any sensor field or open the
oven door to stop an acoustic signal.
AUTOMATIC PROGRAMMES WITH
WEIGHT INPUT
If you set the weight of the meat, the appli-
ance calculates the roasting time.
1. Activate the appliance.
2. Touch
.
can be used at
and then END
. The dot
to choose the auto-
Advertisement
Table of Contents
