Table of Contents
Advertisement
3. Touch
or
gramme (refer to "Recipe book").
The display shows: cooking time, dura-
tion symbol
of measurement (kg, g).
4. Touch
or the settings save auto-
matically after five seconds.
5. The appliance starts. A symbol of the
weight unit flashes in the display. Dur-
ing this time you can change the de-
fault weight value with
Touch
.
6. When set time ends, an acoustic signal
operates for two minutes.
The appliance deactivates.
7. Touch any sensor field or open the
oven door to stop an acoustic signal.
AUTOMATIC PROGRAMMES WITH
CORE TEMPERATURE SENSOR
The core temperature of the food is default
and fixed in programmes with core temper-
USING THE ACCESSORIES
Warning! Refer to "Safety information"
chapter.
CORE TEMPERATURE SENSOR
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the appli-
ance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the "Recipe book".
• The core temperature: refer to the table
for the core temperature sensor in the
"Recipe book".
Important! Only use the core temperature
sensor supplied or original replacement
parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
to set the weight pro-
, a default weight, a unit
or
.
flashes.
on the
ature sensor. The programme ends when
the appliance is at the set core tempera-
ture.
1. Activate the appliance.
2. Touch
.
3. Install the core temperature sensor (re-
fer to "The core temperature sensor").
4. Touch
or
perature sensor programme.
When a core temperature sensor pro-
gramme is set, the display shows the
cooking time,
5. Touch
or the settings save auto-
matically after five seconds.
6. When set time ends, an acoustic signal
operates for two minutes.
The appliance deactivates.
7. Touch any sensor field or open the
oven door to stop an acoustic signal.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows a flashing symbol
and the default set core tempera-
ture. The temperature is 60 °C during
the first use, and the last set value dur-
ing each subsequent use.
4. Touch
or
perature.
electrolux 11
to set the core tem-
and
.
flashes.
to set the core tem-
Advertisement
Table of Contents
