Accessories - GE Range Installation Instructions Manual

ACCESSORIES—TOEKICK
•Install the toekick after the range has been leveled.
•Measure the distance between the floor
and the bottom of range.
•Loosen the two screws on each end. Adjust
the toekick height by sliding the upper and lower
pieces apart to 1/8" less than the measured height.
Installation
(provided)
Push
•Secure the top and bottom sections by tightening
the 2 screws on each end.
•Push toekick against range leg until clip snaps
to legs.
NOTE: Be sure the toekick snaps securely to the leg.
Top of
Toekick
Bottom
Screw
of Toekick
Push
17