Panasonic VIERA TC-P50GT30 Owner's Manual page 60

60
requentlyAsked Questions(FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check, If this does not solve the problem, visit the Panasonic website for further assistance, (see cover)
Y_How do I view the picture fr_ .................... :_ Y
devices such as a: CablelSatellite g_ Press the INPUT button on the remote to select the correct
box game console, Blu'raYor input source.
p ® Check that the device is turned on and functioning correctly.
DVD
I_layer?
............. ""'_°_"" ...... _°'"' ....... _"°'"" _"_ Check if the power cord is plugged in and the TV is turned on "_/
(front red LED light should be on; not blinking) /
Press the INPUT button on the remote to select the correct
input source.
Wh , t,ere
¢_ Ensure all connections are correct and secure. /
blue, black or snowy screen being _ _ When using external video source, such as a Cable/Satellite l:
displayed? F box or DVD player check that the device is on and functioning
correctly
_:f_ Press MENU on the TV's remote control. If the menu is
L_........displ3oed, then th TV i sworking; recheck bevy.., e steps ............ 9
being received (p. 19). HD signal should be 720P, 1080i or 1O80p.
® Select a High Definition channel from your HD source (Cable,
Satellite or fiber optic service). HD channels sometimes
broadcast non-HD content.
@ Ensure that your HD source (HD box, Blu-ray player, etc.) is
connected to the TV with an HDMI or Component cable and
)ut an HD video signal.
S® Change the format (aspect ratio) of the picture by pressing the
Why do back bars appear on the _ FORMAT button on the remote control. (p. 20)
. _ ® Check the aspect settings on your external video source, such
top and bottom and/or s des of as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
the screen? Note: Some content, such as film-based movies, are
available in extra-wide format. Top and bottom bars are
When using a cable service (without a box), check that all
connections are secure.
® When using a cable or satellite box, change the connection
(wiring) to Composite, Component or HDMI. (p. 12)
® If you're using an antenna, then check that connections are
secure. Change the position or direction of the antenna and
I% check the "Signal meter". (p. 47)
Check if electrical products such as kitchen appliances,
fluorescent lights or light dimmers are nearby. They may /
interfere with the TV's picture. /::
® Try viewing a picture from another device, such as a DVD player /
i or a game console, to narrow down the source of the problem. _:
The TV has gone into shutdown mode to protect itself. Try
unplugging it for a few minutes and connecting it again. If
there was a temporary power surge on the AC line it may now
be OK. If the blinking returns, call 1-877-95VIERA (U.S.A.) or
1-866-330-0014 (Canada).
U .....
® The Plasma panel is made up of a few million pixels and
is produced with advanced technology through an intricate /
process. Sometimes a few pixels may be bright or dark. These l:
pixels do not indicate a defective panel and will have no impact