Panasonic VIERA TC-P50GT30 Owner's Manual page 41

[] Sets / Changes wireless network setting
_1_Press "Wireless network" and display setting screen
@_Follow the directions on screen to complete the setting
Search for Wireless networks:
Select an access point from the ones searched for
automatically, and configure the settings as instructed
on the screen.
WPS (Wi-Fi Protected Setup* using push button):
You can connect the Access point to press the
buttons.
WPS (Wi-Fi Protected Setup using PiN number):
* Wi-Fi Protected Setup is an easy setting of the Wi-Fi Set the PIN code that is displayed on the TV on the
Alliance's certification Access point.
6_For more details on setting of an Access point, please Manual settings:
refer to operating manual for the Access point. Manually set SSID, Security type, and Encryption type
to match the settings of the Access point to which to
connect.
6_When connecting by 11n (5 GHz), select "AES" as the
Encryption type for the wireless LAN.
Select "IP/DNS setting mode" and set to
"Automatic"
(When IP/DNS automatic acquisition in DHCP can be
used)
I--
The acquired address is displayed.
__2_ E ach IP address is acquired automatically
if you are using a broadband router, IP automatic
acquisition in DHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
[] Manual setting
Select "IP/DNS setting mode" and set to "Manual"
_ Select the itemand press OK
Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
Set only if specified by the provider, it is not required for normal household use.
_ Select "Proxy setting"
_2_ Select item and press OK
[] Proxy address
This is the address of the relay server that is connected
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
by the provider.
[] Proxy port
This number is specified by the provider together with the
Proxy address.
_3_ Enter address or port number and press OK
_ Entering characters (p. 21)
®
C
0o
Z
o
03
CD
2
o
41