Panasonic VIERA TC-P50GT30 Owner's Manual page 47

Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"(p. 53)
_0 Select "Edit"
Select the item to edit
Favorite
Caption Add
R
G
Proceed to
_next page
Go back to the previous
page
** Caption:
Changes the station
identifier
** Favorite:
Registers channels to the
Favorite List
** Add:
Adds or skips channels
{3} Edit
Q Caption
_: t:L:,, / _C29set
RETURN
Select or edit the station identifier.
(maximum 7 characters available)
_ Favorite
/,1,_ select
set
I Set favorite I Select the number
6_Add
Press OK to select "Yes (add)" or "No (skip)" _"_' RETURN
@ Move the cursor to a channel number
@ Select "Apply"
To cancel the Edit
)select
) next
Check the signal strength if interference is found or freezing occurs on a digital image.
_ _;] _ _ , chane
_.) _t g
_-_ _ or "t channel
intensity
® If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
® Not available if "Cable" is selected in "ANT in" (see p. 46).
6_Available only for digital antenna channels.
®
m
£3..
Q.
O3
©
:3-
CD
O9
47