Panasonic VIERA TC-P50GT30 Owner's Manual page 42

[] Edit the name of this TV [] Switches DLNA remote control (Disable/Enable)
Sets your favorite name for this TV. This name Switches DLNA remote control "Disable" or "Enable"
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
_ Select "VIERA network name"
_2_ Edit the name and press OK
Entering characters (p. 21)
[]Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when "Enable" is selected in "DLNA remote
controF
[] Switches Network remote control (Disable/Enable)
Switches remote control of network device such as a
smartphone to "Disable" or "Enable".
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and
display screen
(_ Set Network camera setting
_,._ Start camera search.
6_Before you start to search for a camera, switch the
camera to registration mode.
¢ Search condition also depends on "Network settings"
_,, Delete camera information.
Fmmmmmmmmmmmmm_l
II !
6_For this operation, please refer to the operating
manual for the Network camera.
<_ Disconnect to camera.
"Disconnected" will be displayed in "Status".
_#,,Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
_ Connect to Camera. "Connect" will be displayed in
"Status".
_ Select "Software update" _2_ Press OK to start the Software update screen
Follow directions on the screen
® Set "Clock" first. (p. 17)
42