Panasonic VIERA TC-P50GT30 Owner's Manual page 55

Technical information
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format
of the received signal and your preference. (p. 20)
(e.g.: in case of 4:3 image)
¢_FULL ¢_JUST
I_ 4 _1 t_ 4 _1
!
Enlarges the 4:3 image horizontally to the screen's side edges. Stretches to justify the 4:3 image to the four corners of the
(Recommended for anamorphic picture) screen,
@ H-FILL
1_4 I 1_16 I -
Enlarges the 4:3 image horizontally to the screen's side
edges. The side edges of the image are cut off.
@ZOOM
I 4 _1 I_16_1
Enlarges the 4:3 image to the entire screen.
(Recommended for letter Box)
(Recommended for normal TV broadcast)
@4:3
I 4_1
i
3
bar
Standard
(Note that "Image retention" of the side bar may occur from
displaying it for a long time.)
@480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):
FULL, JUST, 4:3 or ZOOM
@ 1080p / 1080i / 720p:
FULL, H-FILL, JUST, 4:3 or ZOOM
@Zoom adjustments
Vertical image position and size can be adjusted in "ZOOM".
Select "Zoom adjustments" on the "Picture" menu. (p. 50)
@}V-position: Vertical position adjustment _3}V-size: Vertical size adjustment
@To reset the aspect ratio _ (OK)
@Aspect Ratio: 4:3
!
Size1
Size2 __he w idth w_,, be decreased on both sides to reduce noise.
@Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
See page 50 for more information
;_ The width will be increased on both sides to reduce noise.
®
o
::3-
5-
8"
o
55