Table of Contents
Advertisement
22
Care and cleaning
• Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after
each use and let them dry.
• If you have nonstick accessories, do not clean them using an aggressive agents, sharp
edged objects or dishwasher. It can destroy nonstick coating!
Pyrolytic cleaning
WARNING!
The oven becomes very hot. Keep children away.
1. Remove all parts from the oven.
If you do not remove the shelf support rails, the clock display shows 'C1' and pyrolytic
cleaning procedure cannot start.
2. Remove the worst of the residue manually.
3. Set oven function Pyroluxe menue
– "3:15" appears in the display,
– Duration
While Duration
You can set "2:15" (P2 - Pyroluxe menue light) for less dirt and "3:15" (P1 - Pyroluxe
menue intensive) for more dirt.
If Duration
the pyrolytic procedure.
You can also change switch off time for pyrolytic cleaning using the clock function End
(within 2 minutes of the pyrolytic cleaning starts).
4. Pyrolytic cleaning starts.
During pyrolytic cleaning the light does not operate.
When the oven reaches pre-set temperature, the door locks.
The bars of the heat indicator come up, until the door unlocks again.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
flashes for approximately 5 seconds.
flashes, use + or - to set the necessary length for the procedure.
no longer flashes, push the Selection button again and then set length for
Advertisement
Table of Contents
