Dell 6 series User Manual page 101

Virtual Disk Actions
Table 6-4 describes the actions you can perform on virtual disks. For
procedures you can use to perform these actions, See "Physical Disk
Management" on page 105.
Table 6-4. Virtual Disk Actions
Action
Create a new virtual
disk
Manage dedicated
hot spares
Initialize a virtual
disk
Check data
consistency on a
virtual disk
Display or update
virtual disk
parameters
Manage preserved
cache
Delete a virtual disk Deletes the virtual disk and frees up disk space to create
Delete a disk group Deletes a disk group, which is a collection of disks from one or
Physical Disk Management (PD Mgmt)
The Physical Disk Management screen (PD Mgmt) displays physical disk
information and action menus. The screen displays physical disk IDs, vendor
names, disk size, type, state, and disk group (DG). You can sort the list of
physical disks based on these headings. You can perform several actions on
the physical disks, including the following:
• Rebuilding physical disks
Description
Creates a new virtual disk from one or more physical disks.
You can configure hot spares when you create a virtual disk.
Creates or deletes a hot spare that you can dedicate to a single
redundant virtual disks.
Initializes the selected virtual disk. You must initialize every
virtual disk that is configured. You can perform a fast
initialization or a Full Initialization.
Verifies the correctness of the redundancy data in the selected
virtual disk. This option is available only if RAID level 1, 5, 6,
10, 50, or 60 is used. The PERC 6 controllers automatically
correct any differences found in the data.
Displays the properties of the selected virtual disk. You can
modify the cache write policy, read policy, and the input/output
(I/O) policy from this menu.
Preserves the dirty cache from a virtual disk if it becomes offline
or is deleted. The dirty cache is preserved until you import the
virtual disk or discard the cache.
another virtual disk.
more disk subsystems controlled by management software.
Configuring and Managing RAID
101