Drive Carrier LED Indicators
The LED on the physical disk carrier indicates the state of each physical disk.
Each drive carrier in your enclosure has two LEDs: an activity LED (green)
and a status LED (bicolor, green/amber) as shown in Figure 7-1. The activity
LED flashes whenever the drive is accessed.
Figure 7-1. Drive Carrier LED Indicators
status LED
1
Table 7-10 lists the flash patterns for the status LED.
Table 7-10. Drive Carrier Status LEDs
LED
Off
Steady green
Green flashing
(250 milliseconds [ms])
Green flashing
(On 400 ms, Off 100 ms)
Amber flashing
(125 ms)
130
Troubleshooting
2
Description
Slot is empty, drive is not yet discovered by the system
Drive is online
Drive is being identified or is being prepared for removal
Drive is rebuilding or undergoing a Replace Member
operation
Drive has failed
1
2
activity LED