Control Position And Names - Onkyo L-MS30 Instruction Manual

EN00_L-MS30.book Page 12 Tuesday, September 2, 2003 4:19 PM

Control Position and Names

Front Panel
For operational instructions, see the page indicated in brackets [ ].
1 2
1
POWER switch [26–27]
When POWER switch is pressed to ON, the DVD receiver turns
on.
2
STANDBY indicator [26]
3
Disc tray [36]
When loading a disc, place discs in the disc tray with the label
side facing up.
4
Remote control sensor [9]
Point the remote control toward the remote sensor to operate the
DVD receiver.
5
Display
6
MASTER VOLUME control [32]
The MASTER VOLUME dial is used to control the volume level.
7
0 button [36, 39, 40]
Press to open and close the disc tray.
Display
1
1
Disc indicator [36]
Indicates the type of current disc that is loaded.
2
Source/Listening mode indicators
One of the source indicators lights to show the format of the
current source.
3
TITLE, CHP (Chapter) indicators [47]
Indicate display mode of the current title or chapter of DVD.
4
MEM. (Memory) indicator [44, 56]
5
ST (Stereo), TUNED, AUTO indicators [43]
Indicate the reception mode.
6
REPEAT indicator [47, 52, 60]
Illuminates during repeat playback.
7
A-B indicator [47, 52]
12
3 4
7
2 3
9 0 -
5
8 9 0 - =
8
£/8 button [36–37, 39]
Press to start playback. Press again to pause playback, then once
more to resume playback.
9
7 button [37, 40, 41]
Press to stop playback. Pressing once enables playback to resume
from a point shortly before the location where it was stopped.
Pressing twice causes the disc to return to the beginning of the
disc when playback starts again.
0
4/¢, TUNING/PRESET 2/3 buttons [38, 40, 43]
Press to go back or advance to previous chapters/tracks. Also, use
these buttons to change the tuner frequency.
-
SURROUND button [27, 46]
Press to select a surround mode.
=
INPUT SELECTOR [32, 43]
Press to select the input source other than DVD.
4 5 6 7 8
=
8
FOLDER/TRACK indicator [60]
9
RANDOM indicator [56, 60]
0
£/8 indicators [36]
Lights up in play or pause mode.
-
Parental Lock indicator [31]
=
Multipurpose display
~
Input/Speaker indicator [33–34, 46]
6
~