Audio Connections - Onkyo L-MS30 Instruction Manual

EN00_L-MS30.book Page 20 Tuesday, September 2, 2003 4:19 PM
Connecting Your AV Components
Connecting a Video Device
Video Connections
Use a composite video cable to connect the DR-L30's VIDEO
VIDEO 2 IN to a composite video output on your satellite tuner, etc.,
as shown. Your TV must also be connected via composite video.

Audio Connections

Use an RCA/phono audio cable to connect the DR-L30's L/R
VIDEO 2 IN connectors to the analog audio outputs on your satellite
tuner, etc. as shown.
VIDEO OUT
Satellite tuner,
etc.
20
Connecting a VCR for Recording
Use a composite video cable to connect the DR-L30's VIDEO 1
VIDEO OUT to a composite video input on your VCR, use another
composite video cable to connect the DR-L30's VIDEO 1 VIDEO IN
to a composite video output on your VCR as shown.
Use an RCA/phono audio cable to connect the DR-L30's L/R
VIDEO 1 AUDIO OUT connectors to the analog audio inputs on
your VCR, use another RCA/phono audio cable to connect the DR-
L30's VIDEO 1 AUDIO IN connectors to the analog audio outputs
on your VCR as shown.
R L
AUDIO
OUTPUT
VCR
Notes
• The DR-L30 must be turned on (not Standby) in order to record.
• When you record signal from VIDEO AUDIO OUT jack on the
unit, change the mode SURROUND to STEREO.
R L
VIDEO IN VIDEO OUT
AUDIO
INPUT OUTPUT
R L
AUDIO