Abit ZM6 User Manual page 16

2-6
in the illustration. Note how the module is keyed to the socket. You can refer to
figure 2-6 for the details. This insures the DIMM module will be plugged into the
socket in one way only. Firmly press the DIMM module into the DIMM socket,
making certain the module is completely seated in the DIMM socket.
Step 6. Once the DIMM module has been installed, the installation is complete and the
computer's cover can be replaced. Or you can continue to install other devices and
add-on cards that are mentioned in the following section.
When you install a DIMM module fully into the DIMM socket, the eject tab should be
locked into the DIMM module very firmly and fit into its indention on the both sides.
Note
Chapter2
ZM6