Device Menu - Olympus DS-3500 Instructions Manual

Device Menu

Card Select
By default, the recording media is set to [ SD Card ] by
the manufacturer.
• The recording media [ ] or [
the display.
Cue/Rev
The playback sound of Cue and Review operation
and Cue and Review speed can be set.
1 Select [ Sound ] or [ Speed ].
3
[ Sound ]:
Set the playback sound of Cue and Review to
On or Off.
[ Speed ]:
Set the Cue and Review speed.
2 Select the options.
When [Sound] is selected:
[ On ]:
Activate the playback sound of Cue and
Review.
[ Off ]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and Review speed level
from [ Speed 1 ] to [ Speed 5 ].
• Cue and Review speed level becomes faster as
the numerical value becomes larger.
Power Save
By default, the recorder will enter into Power Save
mode if not used for more than 10 minutes.
[ 5minutes ] [ 10minutes ] [ 30minutes ] [ 1hour ]:
Set the length of time before the recorder will
enter into Power Save mode.
[ Off ]:
Disables this function.
• If any button is pressed, time count will restart.
EN
38
Time & Date
Setting the time and date beforehand enables easier
file management.
For details, see " Setting time and date
[Time & Date] " ( ☞ P.16).
USB Class
] will appear on
You can set the USB class of this recorder with a USB
connection to [ Composite ] or [ Storage Class ].
[ Composite ]:
[ Storage Class ]:
Reset Settings
To reset the menu settings to their default values use
[ Reset Settings ] under [ Device Menu ], or use the
ODMS and DSS Player software.
Format
Cards that have been used in non-Olympus devices,
or cards that are not recognized by the recorder,
must be formatted before they can be used with the
recorder.
• Formatting the card will erase all the stored data,
For details, see " Formatting the card [Format] "
( ☞ P.41).
Card Information
Memory card capacity and remaining card space for
the cards in use will be displayed on the recorder.
System Information
System information about the recorder like the
[ Model ], [ Version ] and [ Serial No. ] can be displayed.
In the 3 classes of Storage, USB audio and human
interface device, USB connection is possible. While
connected via USB in [ Composite ], the recorder
can be used as the USB speaker and the USB
microphone in addition to storage class.
USB connection is possible in only storage class.
including locked files.
Menu items