GE_SAC_ENGL
01-02-2011
NOTES:
1. All electrical work must be performed
by qualified personnel according to
local regulations and this manual.
2. An exclusive power line with correct
rating must be used.
3. Circuit breaker must be installed
between the air-conditioner and the
power line.
4. Make sure an appropriately specified
circuit breaker is used.
5. If the power supply cord of the unit is
damaged, it must be replaced with a
special cord available from the
manufacturer or its service agent.
6. The diameter of the power connecting
cable must be equal to or exceed the
specified value to operate the air-
conditioner safely.
7. Wiring work must conform to national
and local standards.
Page 23
23