Video / Audio - Philips HDR5750 User Manual

Video / Audio

1.
Select a desired Item using [
press [ OK ].
Setup
TV Aspect
Video / Audio
Still Mode
Display
Noise Reduction
HDMI
Dolby Digital
Playback / Recording
DRC
Network
Software
Other
• Sub Menu will appear.
2.
Set the selected item in references below.
TV Aspect
Use this Feature to Adjust the Aspect Ratio of the Video Source
which is different from your TV's Ratio to fit your TV monitor
without Distorting the Picture.
1.
Select a Setting using [
[ OK ].
Aspect ratio
of the video
source
When "HDMI Video
Resolution" is set to
"480p" or when you
Connect this Unit
Setting of
to the TV using the
TV Aspect
Audio/Video cables.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
16:9 Squeeze
EN - 66
/ ], then
• 16:9 Squeeze
• Auto
• Off
• Bitstream
• Off
/ ], then press
4:3
■
When "HDMI Video
Resolution" is set to
"720p" – "1080p".
■
Aspect ratio
of the video
source
When "HDMI Video
Resolution" is set to
"480p" or when you
Connect this Unit
Setting of
to the TV using the
TV Aspect
Audio/Video cables.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
16:9 Squeeze
Note(s)
• TV Aspect may differ from above when watching
Network Service.
If you have a standard TV:
Select "4:3 Letter Box" so that black bars appear on the top
and bottom of the TV screen when playing back a wide-
screen picture.
Select "4:3 Pan & Scan" for a full height picture with both
sides trimmed when playing back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide" when you wish to enjoy 16:9 picture on
the 16:9 TV.
Select "16:9 Squeeze" to enjoy 4:3 picture on the 16:9 TV.
Use this setting to display 4:3 picture on the 16:9 TV without
distorting the aspect ratio of the picture when playing back
standard picture.
Note(s)
• Please contact TV Manufacturer if you have any problem
with it.
16:9
When "HDMI Video
Resolution" is set to
"720p" – "1080p".
Continued on next page.