Connection To The Network - Philips HDR5750 User Manual

Connection to the Network

By connecting this unit to the Internet, you can update the Software via the Internet and access network services.
Note(s)
• For a stable Connection, Wired Connection is recommended when using following Features.
(Using following Features with Wi-Fi Connection can be affected by other devices using Radio frequencies.)
– Video Streaming services
– Network Update
■
Wired Connection
Networking Equipment
(Modem, etc.)
Internet
Caution
• Do Not Insert any Cable other than a LAN cable to the LAN terminal to avoid damaging the Unit.
• Do Not Connect your PC directly to the LAN terminal of this Unit.
Note(s)
• After you made a Wired Connection, set up necessary Network Settings.
(For Network Setting of Wired Connection, refer to 'Network Settings' on page 49.)
• If your Modem does Not have Router Functions, connect a Wired Router.
• If your Modem has Router Functions but there is No Vacant port, add a Hub.
• For a Wired Router, use a Router which supports 10BASE-T / 100BASE-TX ETHERNET standard.
• Please purchase Shielded LAN cables at your local store and use them when you Connect to Network equipment.
Broadband Router or Hub
LAN
LAN cable
(not supplied)
WAN
1
Rear of this Unit
ANTENNA
AUDIO
R OUT L VIDEO OUT
IN
HDMI OUT LAN LAN USB
( )
OUT HDD
LAN
2 3 4 5
LAN cable
(not supplied)
LAN
Continued on next page.
EN - 19