3
HEATING UP...
Automatic Rinse/Cleaning Cycle
When warm-up is complete, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1
2
RINSING
To stop dispensing, press the "
3
The machine is in warm-up phase.
Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
The following display is shown. Wait for the cycle to fi nish automati-
cally.
Note:
When the above steps are complete, the machine shows this display.
You can now perform the manual rinse cycle.
ENGLISH
" button.
13
13