Video output, etc. can be selected by the setting of [OUTPUT SEL] in the main menu → [I/F SETUP] and the setting of [DOWNCON SETTING] →
[DOWNCON MODE].
Menu item
[SDI2/HDMI OUT]
[1080P SDI2/HDMI OUT]
[3G-SDI OUT]
[DOWNCON MODE]
Selecting video output from each terminal
Monitor output setting
[LINE&FREQ]
[SDI2/HDMI
OUT]
[SYSTEM
MODE]
[1080-59.94i]
[DOWNCON]
[SYSTEM
MODE]
[1080-50i]
[DOWNCON]
[SYSTEM
MODE]
[1080-59.94P]
[DOWNCON]
[SYSTEM
MODE]
[1080-50P]
[DOWNCON]
[480-59.94i]
—
[576-50i]
—
* Output type can be selected from [LEVEL-A] or [LEVEL-B] in the main menu → [I/F SETUP] → [OUTPUT SEL] → [3G-SDI OUT]. This item is set to [LEVEL-B] in
the factory setting.
List of recording/playback and output formats
f For details on selection of SDI OUT2 signal methods, refer to "Selecting video output from each terminal" (page 48).
f Frequencies in signal methods are annotated without fractions.
- 59.94 → 60
System mode
[LINE&FREQ]
[1080-59.94i]
[1080-50i]
[1080-59.94P]
[1080-50P]
[480-59.94i]
[576-50i]
Chapter 4 Adjustments and Settings for Recording — Multi formats
Selects the system mode signal method or down converter output for output from the <SDI
OUT2> and <HDMI OUT> terminals.
Selects whether to convert output signals from the monitor output terminals (<SDI OUT2>,
<HDMI OUT>) to 1080i at 1080P.
Selects the 3G-HD SDI signal type output from the <SDI OUT1> and <SDI OUT2> terminals
from [LEVEL-A] or [LEVEL-B] at 1080P.
Selects the screen type for down conversion output (composite and SD SDI output) at 1080P