Panasonic WV-CW324LE Series Operating Instructions Manual page 13

Follow the procedure below.
"CAMERA SETUP" screen
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
D&N(IR) AUTO2
VMD OFF
RET TOP END
Step 1
Set "ALC/ELC" to "ALC", and press the [SET] button.
→The "ALC CONT" screen appears.
CW324L
CW324L
CW314L
Note:
CW314L
CW324L CW304L
• When "ALC/ELC" is set to "ELC" or "ALC+" and the [SET] button is pressed, the "ELC CONT" or "ALC+ CONT"
CW324L CW304L
CW324L CW314L CF314L
screen will appear.
CW314L CF314L
CW314L CW304L CF304L
• Only have "ELC" function.
CW304L CF304L
CW304L CF314L
CF314L
CF314L CF304L
CF304L
CF304L
Step 2
Move the cursor to "BLC" and select the "ON" or "OFF".
ON: Activates the BLC function.
OFF (default): Deactivates the BLC function.
Step 3
Move the cursor to "ABS" and select from the following options.
ABS (Auto Black Stretch Technology)
The latest digital signal technology is applied to automatically detect the dark areas in the image, acquire the brightness data around
the dark areas, and perform real-time color adjustment by calculating the best correction curve for each area. This function can be
used to perform real-time adjustment and correction of back light and dark area, and reproduce natural, clear images.
ON: Uses ABS.
OFF (default): Does not use ABS.
Step 4
When "BLC" is set to "OFF", bright areas of an image are masked to facilitate the visibility of dark areas.
Move the cursor to "MASK SET" and press the [SET] button.
→The mask setting screen appears.
"ALC CONT" screen
**ALC CONT**(1)
BACK LIGHT COMP
BLC
ABS
MASK SET
LEVEL
RET TOP END
"ALC CONT" screen
**ALC CONT**(1)
BACK LIGHT COMP
BLC OFF
ABS OFF
MASK SET
LEVEL .I..... 0
- +
RET TOP END
Mask setting screen
OFF
OFF
.I..... 0
- +
Mask setting screen
13