Advanced Settings - Panasonic TH-50LFE6U Operating Insructions

Item Effect
BACKLIGHT
Darker
PICTURE
Less
BRIGHTNESS
Darker
SHARPNESS
Less

ADVANCED SETTINGS

Item Effect
INPUT
LEVEL
Less
GAMMA
Down
W/B HIGH R
Less
W/B HIGH G
Less
W/B HIGH B
Less
W/B LOW R
Less
W/B LOW G
Less
W/B LOW B
Less
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B HIGH R" , "W/B HIGH G" and "W/B HIGH B"
settings.
2. Adjust the white balance of the dark sections using the "W/B LOW R" , "W/B LOW G" and "W/B LOW B"
settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time
or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
Adjustments
Adjusts luminance of the back light.
Brighter
Adjusts the proper picture contrast.
More
Adjusts for easier viewing of dark
pictures such as night scenes and
Brighter
black hair.
Adjusts picture sharpness.
More
Adjustment of parts which are extremely bright and hard to see.
More
S CURVE
Up
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light green areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark green areas.
More
Adjusts the white balance for dark blue areas.
More
/ Normalization)
NORMALIZE
PICTURE Adjustments
Notes:
• You can change the level of each function
(BACKLIGHT, PICTURE, BRIGHTNESS,
SHARPNESS) for each PICTURE
MENU.
• The setting details for STANDARD,
DYNAMIC and CINEMA respectively
are memorized separately for each input
terminal.
• "BACKLIGHT" can be adjusted when
"ECO MODE" is set to "CUSTOM" and
"POWER SAVE" to "OFF". (see page
32)
Details
2.0 2.2 2.6
25