Maintenance - Panasonic TH-50LFE6U Operating Insructions

WARNING
Setup
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not
hang over the edge of the base.
• The Display may fall off or tip over.
Do not place any objects on top of the Display.
• If water spills onto the Display or foreign objects get
inside it, a short-circuit may occur which could result in
¿ re or electric shock. If any foreign objects get inside
the Display, please consult an Authorized Service
Center.
Do not cover the ventilation holes.
• Doing so may cause the Display to overheat, which
can cause ¿ re or damage to the Display.
Transport only in upright position!
• Transporting the unit with its display panel facing
upright or downward may cause damage to the internal
circuitry.
For suf¿ cient ventilation;
Leave a space of 3
15/16
left and right, and 1
31/32
and also keep the space between the bottom of the
display and the À oor surface.
Cautions for Wall Installation
• Wall installation should be performed by an
installation professional. Installing the Display
incorrectly may lead to an accident that results in
death or serious injury. Furthermore, when installing
on a wall, a UL standard certi¿ ed wall hanging
bracket (TH-42LFE6U: VESA 400X400,
TH-50LFE6U: VESA 400X200) must be used.
Do not install the product to a place where the
product is exposed to direct sunlight.
• If the screen is exposed to direct sunlight, the liquid
crystal panel may have adverse effect.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which
neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface
is dry.
• Do not scratch or hit the surface of the panel with ¿ ngernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside
the unit, operating problems may result.
• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
Usage of a chemical cloth
• Do not use a chemical cloth for the panel surface.
• Follow the instructions for the chemical cloth to use it for the cabinet.
" (10 cm) or more at the top,
" (5 cm) or more at the rear,
Safety Precautions
AC Power Supply Cord
The Display is designed to operate on 110 - 127 V
AC, 50/60 Hz.
Ensure that the mains plug is easily accessible.
Do not use any power supply cord other than that
provided with this unit.
• Doing so may cause ¿ re or electric shocks.
Securely insert the power cord plug as far as it will
go.
• If the plug is not fully inserted, heat may be generated
which could cause ¿ re. If the plug is damaged or the
wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When
disconnecting the power cable, hold the plug, not the cable.
• Do not make any modi¿ cations, place heavy objects
on, place near hot objects, heat, bend, twist or
forcefully pull the power cable. Doing so may cause
damage to the power cable which can cause ¿ re or
electric shock. If damage to the cable is suspected,
have it repaired at an Authorized Service Center.
If the Display will not be used for a long period of time,
unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the
Display, unplug the power cord immediately.
• Continuous use of the Display under these conditions might
cause ¿ re or permanent damage to the unit. Have the
Display evaluated at an Authorized Service Center. Services
to the Display by any unauthorized personnel are strongly
discouraged due to its high voltage dangerous nature.
If water or foreign objects get inside the Display, if the
Display is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.
• A short may occur, which could cause ¿ re. Contact an
Authorized Service Center for any repairs that need
to be made.
7