Setting An Unlock Pattern - Samsung Galaxy S III User Manual

Setting an Unlock Pattern

Creating a screen unlock pattern increases security on the
phone. When you enable the User visible pattern field, you
will draw an unlock pattern on the screen whenever you
want to unlock the phone's buttons or touch screen. When
you activate the User tactile feedback field, you feel vibration
as feedback while drawing the pattern.
The feature is now paired with a backup PIN code that acts
as a backup to the pattern lock. If you forget your pattern,
you can regain access to the device by entering a PIN code.
Note: Make sure the Require Pattern field is activated.
1. From the main Settings page, tap Lock screen.
2. Tap Screen lock
3. Read the instructions then tap Next.
4. Review the on-screen animation procedure for drawing
a pattern and tap Next when you are ready to draw a
pattern.
Pattern.
5. Draw your pattern by touching your first on-screen
point. Then, without removing your finger from the
screen, drag your finger over adjacent points until the
gray trace line overlaps each point and they are
highlighted with a green circle.
6. When you have connected at least four dots in a
vertical, horizontal or diagonal direction, lift your finger
from the screen and tap Continue.
7. Confirm the new pattern by redrawing it and then
tapping Confirm. The Unlock pattern is set.
8. Enter the backup PIN code and tap Continue.
9. Reenter the PIN to reconfirm the previous entry and
tap OK.
Changing Your Settings 287