Data Usage - Samsung Galaxy S III User Manual

Scanning for Devices
This option allows you to scan for active Bluetooth devices so
you can pair with them.
1. From the main Settings page, tap Bluetooth.
2. From the bottom of the Bluetooth settings page, tap
Scan to search for visible external Bluetooth-
compatible devices such as headsets, devices,
printers, and computers.
Important! Some Bluetooth devices are secured and require a
PIN number to confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required,
and tap OK.

Data Usage

Monitor and mange your device's data usage capabilities.
Features include activation/deactivation or network data
usage, set mobile data usage for a set period of time, and
view application data usage.
From the main Settings page, tap Data usage.
To activate/deactivate Mobile data usage:
1. From the main Settings page, tap Data usage.
2. Tap the Mobile data field to activate the feature. A
green checkmark indicates the feature is active.
3. Tap the Mobile data field again to deactivate the
feature.
To set a mobile data limit:
1. From the main Settings page, tap Data usage.
2. Place a check mark in the Set mobile data limit field.
3. Read the on-screen disclaimer info and tap OK.
4. Touch and drag the far right ends of the Red or Orange
horizontal lines to manually adjust both the Warning
and Maximum data limits.
5. Touch and drag the bottom grey vertical lines to adjust
the time frames.
Changing Your Settings 257