Samsung Galaxy S III User Manual page 261

Wi-Fi Direct Setup and Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.
Displays when Wi-Fi Direct is active and
configured for a direct connection to another
compatible device in the same direct
communication mode.
Displays when Wi-Fi Direct is active and
communicating
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
To activate your connection:
1. From the main Settings page, touch and slide the Wi-Fi
slider to the right to turn it on. The slider color indicates
the activation status.
2. Tap Wi-Fi Direct.
3. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect
names to begin the connection process to these Wi-Fi
Direct compatible devices.
4. The target device is notified of the connection attempt
via an on-screen Invitation to connect popup. Tap
Accept to complete the connection.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5. Tap Done. The direct connection is then established.
Confirm appears in the Status bar.
Scan and select all the device
Changing Your Settings 255