Setting Windows passwords
Password
User password
Administrator password
Setting Setup Utility (BIOS) passwords
Password
Administrator password
Power-on password
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):
1.
To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press
f10.
2.
Use the arrow keys to select Security, and then follow the on-screen instructions.
Your changes take effect when the computer restarts.
64
Chapter 8 Securing your computer and information
Function
Protects access to a Windows user account.
Protects administrator-level access to computer contents.
NOTE:
This password cannot be used to access Setup
Utility (BIOS) contents.
Function
●
Must be entered each time you access Setup Utility
(BIOS).
●
If you forget your administrator password, you cannot
access Setup Utility (BIOS).
NOTE:
The administrator password can be used in place of
the power-on password.
NOTE:
Your administrator password is not interchangeable
with an administrator password set in Windows, nor is it
revealed as it is set, entered, changed, or deleted.
NOTE:
If you enter the power-on password at the first
password check, you must enter the administrator password
to access Setup Utility (BIOS).
●
Must be entered each time you turn on or restart the
computer.
●
If you forget your power-on password, you cannot turn
on or restart the computer.
NOTE:
The administrator password can be used in place of
the power-on password.
NOTE:
A power-on password is not revealed as it is set,
entered, changed, or deleted.
ENWW