Calibration; Tv Section (For Ti-710Bt Only) - Farenheit TI-710B Owner's Manual

CALIBRATION

The calibration of the screen is useful when some
malfunction occur with the touch screen and it
needs adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to
another position, tap and hold at the center of the
new target. Repeat each time to complete the
calibration process. When the calibration has been
completed, the device switches back to the previous
operating mode and retain the previous setting. If
you press Reset button, the setting will return to
factory setting.

TV SECTION (For TI-710BT only)

Connect a TV antenna to the TV antenna jack of the unit. Select TV mode; press on the center
of the touch screen, and following interface will be display:
1. In TV mode, press the Play/Pause buttons on remote once to enter TV menu setting, or
press touch-screen to choose TV MENU icon to enter TV MENU.
2. Press the / on remote or tap the screen to select one of the setup pages: Auto program
=> Manual program.
3. Press the ENTER button on remote or tap "Auto program or Manual program" on screen to
enter the one of the pages.
4. Press the / on remote buttons or tap relevant option to select the setting.
5. Press ENTER on the remote again to confirm, tap BACK button to return to the setup page.
6. Press the icon to be back to main menu.
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)

System
Select this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or tap the screen to select.

Audio
Select this menu item is to set the TV sound system:
19