Speakers
Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Keyboard (see
●
Top cover (see
●
USB board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the speaker cables (2) from the clips built into the base enclosure. Remove the Phillips
PM2.5×9.0 screw (3) and the three Phillips PM2.5×6.0 screws (4) that secure the speakers to the
computer. Remove the speakers (5).
62
Chapter 4 Removal and replacement procedures
Battery on page
39), and then remove the following components:
Optical drive (select models only) on page
Keyboard on page
49)
Top cover on page
52)
USB board on page
59)
Spare part number
647315-001
40)