Features And Benefits; Installation System; Transfer Switch - Generac Power Systems CENTURION SERIES Specification

ES Standby Generator System - 7 kW
Engine
•Generac OHV engine
•Cast iron cylinder walls
•Electronic ignition/spark advance
2 of 5
•Pressurized filtration system
•Low oil pressure shutdown system
•High temperature shutdown
•Spin-on automotive type oil filter
Generator
•Revolving field
•Displaced phase excitation
•Automatic voltage regulation
•UL 2200 listed

Transfer Switch

•Fully automatic
•Remote mounting
•Flush mountable
•UL listed
Controls
•Auto/Off/Manual switch
•Utility voltage sensing
•Utility interrupt delay
•Engine warm-up
•Engine cool-down
•Seven day exerciser
•Timed Trickle Battery charger
•Main line circuit breaker
Unit
•Weather protective enclosure
•Enclosed critical grade muffler
•Small, compact, attractive
•SAE

Installation System

•1ft. (305mm) flexible fuel line connector
A durable, reliable powertrain for maximum power output.
Rigid construction and added durability provide long engine life.
These features combine to assure smooth, quick starting every time.
Better performance, less maintenance and significantly longer engine life.
Shutdown protection prevents catastrophic engine damage due to low oil.
Prevents damage due to overheating.
Captures and collects harmful impurities with easy serviceability.
Allows for a smaller, light weight unit that operates 25% more efficiently than a revolving armature generator.
Maximizes motor starting capability.
Regulates the output voltage to ±5% prevents damaging voltage spikes.
For your safety.
Transfers your vital electrical loads to the energized source of power.
Mounts near your existing distribution panel for simple, low cost installation.
Can be installed between studs like a standard electrical panel.
For your safety.
Selects the operating mode.
Constantly monitors utility voltage, setpoints 60% dropout, 80% pick-up, of standard voltage.
Prevents nuisance start-ups of the engine, adjustable 10-30 seconds.
Ensures engine is ready to assume the load, setpoint approximately 5 seconds.
Allows engine to cool prior to shutdown, setpoint approximately 1 minute.
Operates engine to prevent oil seal drying and damage between power outages.
Maintains battery charge level to ensure starting.
Protects generator from overload.
Ensures protection against mother nature. Tool-less removal of roof and sides. Three lift-out panels for easy access
to all routine maintenance items. Composite polymer enclosure will not rust and is ideal for harsh and coastal
installations.
Quiet, critical grade muffler is mounted inside the unit to prevent injuries.
Makes for an easy, eye appealing installation.
Sound attenuated enclosure ensures quiet operation.
Easy installation.

features and benefits