Gear Case, Timing Gear, Camshaft, Oil Pump; Detaching Governor Spring; Removing Speed Control Plate - Westerbeke Universal M-50 Operator's Manual

GEAR CASE, TIMING GEAR, CAMSHAFT, OIL PUMP
DETACHING GOVERNOR SPRING
1. Detach the governor springs 1 and 2 from governor fork lever 2.
NOTE FOR RE,ASSEMBLING: Fix the governor spring to the speed control lever, and pull the
spring or wire through the window of the injection pump, and spring will be able to be hooked on
the governor fork with ease. Bend the end of the governor spring to prevent it from falling off.
How to remove governor spring
~
1. Detach Governor Spring on the Side of Fork Lever
2. Gear Case
3. Fork Lever 2
REMOVING SPEED CONTROL PLATE
1. Remove the speed control plate and governor spring.
NOTE FOR REASSEMBLING: Be careful not to drop the governor spring in the gear case.
93
(2)