Mitsubishi 4G6 Manual page 98

11C-28
Timing marks
Camshaft sprocket
Timing mark
Timing mark
Crankshaft
sprocket
Timing mark
Timing mark
Timing mark
Timing mark
ENGINE <4D6> -
INSTALLATION SERVICE POINTS
"AA TIMING BELT INSTALLATION
Injection
1. Ensure that the timing marks of the camshaft sprocket,
pump
sprocket
Oil pump
sprocket
2. Move the timing belt tensioner downward and loosely
Move to the
bottom of the slot.
3. Install the timing belt onto the crankshaft sprocket, the
"BA TIMING BELT TENSION ADJUSTMENT
1. Turn the crankshaft anti-clockwise by a distance
1/2 tooth
2. Loosen (by 90_ to 120_ turn) the tensioner installation
3. In addition, turn the crankshaft anti-clockwise by a distance
4. Tighten the timing belt tensioner to the specified torque.
2-1/2 teeth
5. Turn the crankshaft clockwise and align the timing mark.
Timing Belt
the injection pump sprocket, the crankshaft sprocket, and
the oil pump sprocket are all aligned.
tighten the bolt so that the tensioner doesn't return.
timing belt idler, the camshaft sprocket, the injection pump
sprocket, and the oil pump sprocket in that order.
Caution
If the timing belt is reused, install so that the arrow
marked on it at the time of removal is pointing in
the clockwise direction.
equivalent to 1/2 tooth of the camshaft sprocket in order
to correct looseness at the timing belt idler side.
bolt previously secured provisionally, taking advantage
of the force of the tensioner spring to provide tension
to the belt.
equivalent to 2-1/2 teeth.
Tightening torque: 48 Nm