Setting The Timer - Sanyo XHX1252 Instruction Manual

Using the timer
Time indicator of timer
Timer indicator
OFF timer
OFF
ON
Set time
OFF cycle timer
OFF
OFF
ON ON
Set time
Set time
ON timer
OFF
ON
Set time
NOTE
18

Setting the Timer

• Set the timer during air conditioner operation.
To stop the air conditioner after a preset time
elapses
To always stop the air conditioner after a preset
time elapses
To start the air conditioner after a preset time
elapses
Each time is pressed, the time setting increases at 0.5-hour (30 minute) intervals. The
upper limit is 72.0 hours.
Each time is pressed, the time setting decreases at 0.5-hour (30 minute) intervals. The
lower limit is 0.5 hours.
The timer cycles through the following options each time
pressed.
Use this mode to turn off the unit automatically after a preset time elapses.
Use this mode to always turn off the unit automatically after a preset time elapses.
Use this mode to start the unit automatically after a preset time elapses.
When two remote control units are being used, either a main-remote control unit or a sub-
remote control unit can be used for timer operations.
Recommended usage
No display
Display
OFF timer
OFF cycle
timer
ON timer
(TIMER SET button) is
OI-837-18-EG